The GLO Belt Support (GL-J02) provides additional structural support for the GLO belt along its installed run. It supplements the Belt Fixing (GL-J01) in installations requiring more secure routing — longer spans between fixings, heavier fixture loads along a section, or overhead locations where the belt needs additional retention. Black finish.

While the Belt Fixing (GL-J01) clips the belt to a surface at regular intervals, the Belt Support adds a secondary retention point for sections of the belt with higher mechanical demands — for instance, a long horizontal span carrying multiple heavy fixtures, or a ceiling section with irregular surface conditions. Use Belt Supports at points along the run where the standard fixing spacing alone is insufficient for the belt to remain properly aligned and taut.

Compatible with the GLO 48V belt-link lighting system. Dispatched from Bengaluru within 24 hours. All India delivery. WhatsApp +91 94484 64040 for trade and project enquiries.

When do I use a Belt Support instead of a Belt Fixing?

The Belt Fixing (GL-J01) is the standard interval clip for most of the belt run. The Belt Support (GL-J02) is used at specific points requiring additional retention — long spans between fixings, sections with multiple heavy fixtures, or structurally demanding overhead positions. In most standard residential installations, Belt Fixings alone are sufficient; Belt Supports are specified for commercial or technically demanding runs where the engineer or installer requires more positive retention at key points.