The GLO Belt Fixing (GL-J01) is the clip that secures the GLO belt to a ceiling or surface along its run. Belt Fixings determine the route the belt takes across the ceiling and hold it in position between the canopy connection point and the end caps. Black finish. Multiple fixings are used per installation run.

In a typical GLO ceiling installation, Belt Fixings are placed at regular intervals along the belt route — approximately every 300 to 500mm — to hold the belt flat against the ceiling surface and define its path. On curved routes or around corners, fixings are placed more closely to maintain the belt's direction. The fixing clips are sized to the belt width and release if needed for repositioning without damaging the belt or the ceiling surface.

Compatible with the GLO 48V belt-link lighting system. Dispatched from Bengaluru within 24 hours. All India delivery. WhatsApp +91 94484 64040 for trade and project enquiries.

How many Belt Fixings do I need for a GLO installation?

A rule of thumb is one fixing per 300 to 500mm of belt run, plus additional fixings at any change of direction, corner, or junction. For a 4-metre linear belt run, plan for approximately 8 to 12 fixings. For curved or complex routes, increase the count. Fixings are inexpensive and over-specifying is preferable to under-specifying — a belt with too few fixings sags or shifts from its intended route.