The GLO Linear Spot Light (GL-A04) is a belt-link fixture that extends the standard round GLO spotlight into a long, rectangular bar form. Available in 12W (323mm), 24W (642mm), and 36W (961mm). All produce a 24° focused beam in 3000K warm white, CRI greater than 90. Sand Black and Sand White. Dimmable 0-10V. 2-year warranty.
The linear form serves a different spatial purpose from the round GLO spots. Mounted along a wall or a surface parallel to a run of shelving, art, or architectural feature, the 24° narrow beam from a linear source creates a ribbon of directed light rather than a circular pool — washing a wall top-to-bottom or grazing across a textured surface in a single continuous line. The 36W at 961mm produces 2,507 lumens from a fixture that spans nearly one metre — appropriate for lighting a full-height bookcase, a long dining table setting, or the length of a kitchen island when mounted on a belt overhead.
The GLO system operates on 48V DC — a touch-safe low voltage that makes the belt suitable for exposed ceiling and creative installations that mains-voltage track cannot safely permit. Power runs through the conductive belt; any GLO fixture clips on at any point along it and locks in place in seconds, no tools and no rewiring required. Relocate a fixture when the room changes — different sofa position, new artwork, reconfigured shelving — in the same amount of time it would take to move the furniture. All GLO fixtures dim continuously via a 0-10V dimming signal connected to the power supply; one dimmer controls all fixtures on that circuit.
-
12W (323mm): Short linear accent, art pieces, compact architectural features
-
24W (642mm): Medium-length feature lighting, dining tables, shelving runs
-
36W (961mm): Long feature walls, full kitchen island length, gallery-style installations
12W: 323mm × 45mm, 835 lumens. 24W: 642mm × 45mm, 1,671 lumens. 36W: 961mm × 45mm, 2,507 lumens. All: 3000K warm white, CRI >90, 24° beam angle, 48V DC input, dimmable 0-10V, 2-year warranty. Dispatched from Bengaluru within 24 hours. All India delivery. WhatsApp +91 94484 64040.
When should I choose a linear spot over a round spot for a belt installation?
Choose the Linear Spot (GL-A04) when the surface you are lighting is long rather than circular — a dining table, a continuous shelving wall, a kitchen counter, or a long feature wall. The linear form's 24° beam from a 961mm source creates a ribbon of light across the length of that surface rather than multiple overlapping circles from individual round spots. For isolated objects like artworks or chairs, the round GL-A01 spot is more appropriate; for continuous surfaces, the GL-A04 linear is the cleaner specification.
What is the physical size of each wattage and how do I choose?
The 12W is 323mm long — approximately one foot. The 24W is 642mm — approximately two feet. The 36W is 961mm — approximately three feet. Choose based on the length of the surface you are lighting. For a 900mm dining table width, the 36W linear sits directly over it. For a 600mm artwork, the 24W is a better match. All three have identical beam angles, colour temperature, and CRI — only the length, wattage, and total lumen output differ.
Can linear and round GLO fixtures be mixed on the same belt?
Yes — the GLO belt system accepts all GLO fixture types on the same 48V DC belt run. A typical dining and kitchen installation might use two or three GL-A04 Linear Spots over the island and table, with GL-A01 round spots elsewhere in the room, all on a single belt powered by one 200W power supply. Total wattage of all fixtures must not exceed the power supply rating.