The Zen Input Module is the single connection point between the Zen Power Supply and the ultra-thin 21mm track, clipping to the rail on one end and wiring to the driver on the other — a necessary component in every Zen circuit, since without it the power supply has no physical way to feed the track.

Given how compact the entire Zen system is — the H5mm track, the H12mm flat fixtures — this module is correspondingly minimal, adding negligible visual or physical bulk at the connection point compared to the input hardware on bulkier track systems. This matters specifically for a system whose entire design premise is a near-invisible ceiling presence; a large or obtrusive input connector would undercut that design intent at the one point where it's most likely to be noticed.

One module is required per Zen circuit, positioned at the point where the power supply's cable reaches the track. For installations with multiple separate Zen circuits — different rooms, or zones controlled independently — each circuit needs its own input module and dedicated power supply, rather than sharing a single connection point across multiple track runs.

Dispatched from Bengaluru within 24 hours. All India delivery. WhatsApp +91 94484 64040.

Is one Input Module sufficient for a Zen installation with multiple track sections joined together?

Yes, provided those sections are all part of one continuous circuit powered from a single point — the connectors joining track sections carry power across the joints, so one Input Module at the circuit's power entry point serves the entire connected run. Separate independently-controlled circuits each need their own module. Physically, this module adds minimal visible bulk at the track connection point, consistent with the Zen system's overall design priority of an unobtrusive ceiling presence throughout every component, not just the track and fixtures themselves.

Is the Zen Input Module compatible with the standard NEUE track system?

No. The Zen Input Module is built specifically for the 21mm Zen track profile and is not interchangeable with NEUE's input modules, which are engineered for NEUE's 22mm track geometry. Always match input hardware to the specific track system in use.

Zen is part of the magnetic track lighting category — see Track lighting for background on how these systems work.