At 22mm wide, the NEUE Surface/Pendant Track is narrow enough to read as a deliberate architectural line rather than a utility rail — conventional surface tracks typically run 35-50mm, and the visual difference on a finished ceiling is immediately obvious. Available in 1M, 2M, and 3M lengths, black, 48V DC, mounts directly to the ceiling surface or suspends as a pendant.

Every fixture in the NEUE range clips to this track magnetically, without tools, and repositions the same way — which is the actual advantage over a fixed installation, not just the initial fit-out. A track laid out for one furniture arrangement can be relit for a different one months later by sliding fixtures to new positions, something a hardwired downlight layout cannot do without cutting into the ceiling again. Multiple lengths join end to end using Surface Jointers (90°, curved, L-shape, X-shape) to build L-shaped, U-shaped, or grid layouts without a wiring change at each joint.

In pendant configuration — suspended below the ceiling via the Hanging Tube (T20L) or Hanging Set (T20-A) rather than mounted flush — the track itself becomes a visible design element, with fixtures like the T20 HN pendant light hanging along its length to create a multi-pendant effect over a dining table or kitchen island.

Power enters through a single Input Module (T20-G or T20-H) connected to a power supply; one circuit powers every fixture on that run up to the supply's wattage rating. A 2-metre track spanning a standard 12-foot Indian residential room, joined from a 2M and 1M section, is a typical single-room specification.

• 1-metre: Short runs, alcove lighting, single display sections
• 2-metre: Standard residential room span, dining pendant runs
• 3-metre: Longer spans, open-plan zones, commercial installations

Dispatched from Bengaluru within 24 hours. All India delivery. WhatsApp +91 94484 64040 for a ceiling layout plan.

What is the difference between Surface/Pendant and Deep Recessed Trimless track?

Surface/Pendant sits visibly on the ceiling — the 22mm track itself is part of the design, with fixtures attached along it. Deep Recessed Trimless sits flush inside a channel cut into the ceiling, invisible from below once finished, showing only the fixtures and their light. Surface is simpler to install into an existing ceiling; Recessed requires planning during construction but leaves no visible hardware.

Can this track be suspended as a pendant over a dining table?

Yes, using the Hanging Tube Scalable (T20L) to set the drop height, typically 400-800mm below the ceiling for standard 9-10 foot Indian residential ceilings. NEUE fixtures, including the T20 HN pendant light, then attach along the suspended track for a multi-pendant effect that repositions without rewiring.

NEUE is part of the magnetic track lighting category — see Track lighting for background on how these systems work.