The GLO 360° Sphere Light (GL-A07) is a 10W warm white sphere fixture for the GLO 48V belt-link system, emitting 805 lumens in all directions simultaneously at 3000K. CRI greater than 90. Sand Black only. Dimmable 0-10V. 2-year warranty. It is the only GLO fixture that illuminates both the room and the ceiling above it — including the belt itself.

The 360° omnidirectional output is what makes this fixture functionally and visually distinct. Every other GLO fixture directs light downward — spot, diffused, cone, linear — whereas the Sphere illuminates in all directions. Light bounces upward to the ceiling, creating an ambient glow that softens the room while simultaneously showing the belt and ceiling structure. In dark or textured ceiling installations — timber, concrete, exposed brick — the Sphere reveals the ceiling as part of the design rather than leaving it as a void above the fixtures. At 805 lumens from 10W (80 lumens per watt), it pulls more light per watt than the GL-A01 Spot.

The GLO system operates on 48V DC — a touch-safe low voltage that makes the belt suitable for exposed ceiling and creative installations that mains-voltage track cannot safely permit. Power runs through the conductive belt; any GLO fixture clips on at any point along it and locks in place in seconds, no tools and no rewiring required. Relocate a fixture when the room changes — different sofa position, new artwork, reconfigured shelving — in the same amount of time it would take to move the furniture. All GLO fixtures dim continuously via a 0-10V dimming signal connected to the power supply; one dimmer controls all fixtures on that circuit.

10W. 3000K warm white. CRI >90. Beam angle 360° (omnidirectional). Luminous flux 805 lumens. Input 48V DC. Dimmable 0-10V. Sand Black body only. 2-year warranty. Dispatched from Bengaluru within 24 hours. All India delivery. WhatsApp +91 94484 64040.

Why use a 360° sphere light instead of a standard diffused light?

The Sphere is chosen when the ceiling itself is intended to be lit — not just the room below. In interiors with textured, dark, or architecturally interesting ceilings, the upward component of the Sphere's output reveals those surfaces and creates genuine ambient depth. A diffused light (GL-A02) directs light downward at 120° but leaves the ceiling above the fixture dark. The Sphere is also often used in pendant or floor lamp configurations where light in all directions is the design intent.

Why is the GL-A07 available in Sand Black only?

The Sphere's design integrates the body colour into its visual effect more prominently than directional fixtures — the sphere form is always visible from multiple angles. Sand Black was selected as the single variant to complement both light and dark belt colours and ceiling environments. If the installation palette requires a white spherical element, consult via WhatsApp +91 94484 64040 to discuss project-specific options.

Can the GLO Sphere Light be used as a pendant or floor lamp?

Yes — the GLO system's counterweight (GL-D6) and support rod (GL-C07) accessories are designed to enable exactly this application. The belt can be suspended vertically with the Sphere attached, the counterweight provides stability at the base, and the result is a floor-standing or pendant lamp that requires no separate fixture body — the belt and sphere are the lamp. This is one of the most distinctive GLO installation configurations.