Sliding door bolts, sliding latches, and sliding locks for sliding doors, bathroom doors, room doors, windows, and cabinet shutters in Indian homes and commercial interiors — T21's sliding lock collection covers the full range of bolt and latch hardware for applications where a mortise lock is not the correct or possible specification. Sliding bolts are the simplest and most reliable locking mechanism for interior doors — a single-part mechanism with no springs, cylinders, or mechanisms to fail, operated by hand from inside in a single direct motion. Available across multiple sizes and finishes. GST invoice available. Delivered all over India, dispatched from Bengaluru within 24 hours on working days.
Sliding locks in Indian homes serve primarily privacy and secondary security functions — they are not the primary security mechanism for entrance doors but the correct specification for bathroom doors, bedroom doors where inside privacy is the requirement, and cabinet and wardrobe shutters where a simple closure latch is needed. For applications where locking from outside is also required, a sliding lock is used in combination with an aldrop and padlock rather than as a standalone security fitting.
What is the difference between a surface-mounted sliding bolt and a flush sliding bolt? A surface-mounted sliding bolt sits proud of the door face — the bolt body is visible and projects from the surface, and the bolt slides horizontally through a staple fixed to the frame. A flush sliding bolt is recessed into the door edge — the bolt body sits within a routed channel and the face plate is flush with the door surface when the bolt is withdrawn. Flush bolts are the premium specification for internal doors where a clean door face is the design requirement.
What size sliding bolt is correct for an Indian bathroom door? For a standard Indian bathroom door, a 4-inch (100mm) to 6-inch (150mm) sliding bolt is the most commonly specified size — long enough to engage the staple with sufficient bolt travel to hold the door securely while in use, without the bolt body being disproportionately large for the door. For heavier bathroom doors above 50kg, specify a bolt with a body width of at least 25mm for adequate engagement strength.